Noodlehead Hillside Tote Paper Pattern
Perfect for on the go when you want something a little simpler but still keep organized. This classic crossbody with a zip top closure will be one you will want to make over and over again. Feature your favorite print or keep it simple with a solid! Includes front and back exterior pockets and interior pockets. Adjustable strap makes it wearable in any season. Perfect for gifting! Regular size and mini!
Special features:
top zipper to keep your belongings secure
front and back exterior pockets
two sizes to sew, regular and mini!
made entirely of rectangles, no need to cut out templates (see below for details)
Skill Level/Dimensions/Materials:
Skill Level: Advanced Beginner
+ Approx. Finished Dimensions: 9 ½” wide by 3” deep (measured at base), 9 ¼” tall, width at top opening is 12 ½” [8 ¼” wide by 2 ½” deep (measured at base), 8 ¼” tall, width at top opening is 10 ½”]
Materials needed:
Requirements based on 44”-wide fabric.
Exterior fabric requirement* not suitable for one-way directional fabric.
Mini size noted in [brackets].
FQ=Fat Quarter (18” x 22”)
½ yard [FQ] Exterior Fabric*
½ [½] yard Accent Fabric (includes Exterior pockets and Strap/Strap Holders)
¾ [½] yard Lining Fabric (includes Interior Pocket)
2 ¼ [1 7/8] yards Fusible Woven Interfacing (Pellon SF101 - 20”-wide)^
(1) 12” [10”] zipper* for top closure
(2) 1”-wide d-rings, (2) 1”-wide swivel clasps AND (1) 1”-wide strap slider (hardware kit available here)
(1) 18mm thin magnetic snap (for front pocket closure) OR (1) size 24 metal snap can be substituted
*PLEASE NOTE: this pattern is written for fixed-length zippers (not zipper by the yard, if using zipper by the yard please add 1.5" to the length of each designated zipper)
Recommended Fabrics: Canvas (6-8 oz. weight) for exterior and Accent fabric. Quilting cotton or lightweight canvas for Lining.
^= depending on your exterior or accent fabric choice (such as a heavier canvas or a waxed canvas in a 7-9 oz. weight), you may be able to omit the interfacing for the exterior fabric and/or some of the accent pieces. For this option, reduce fusible interfacing requirement to 1 ¼ [¾] yards and do not interface those pieces.
Additional supplies + tools: Polyester thread, water-soluble pen/tailor’s chalk, cutting mat, ruler, rotary cutter, size 14 or 16 denim or Microtex needle, glue or glue pen, (optional) 1”-wide x 50” leather strap/webbing (or length as desired) may be substituted for fabric strap
Featured Fabrics are Surface by Amy van Luijk for Figo Fabrics.
Perfect for on the go when you want something a little simpler but still keep organized. This classic crossbody with a zip top closure will be one you will want to make over and over again. Feature your favorite print or keep it simple with a solid! Includes front and back exterior pockets and interior pockets. Adjustable strap makes it wearable in any season. Perfect for gifting! Regular size and mini!
Special features:
top zipper to keep your belongings secure
front and back exterior pockets
two sizes to sew, regular and mini!
made entirely of rectangles, no need to cut out templates (see below for details)
Skill Level/Dimensions/Materials:
Skill Level: Advanced Beginner
+ Approx. Finished Dimensions: 9 ½” wide by 3” deep (measured at base), 9 ¼” tall, width at top opening is 12 ½” [8 ¼” wide by 2 ½” deep (measured at base), 8 ¼” tall, width at top opening is 10 ½”]
Materials needed:
Requirements based on 44”-wide fabric.
Exterior fabric requirement* not suitable for one-way directional fabric.
Mini size noted in [brackets].
FQ=Fat Quarter (18” x 22”)
½ yard [FQ] Exterior Fabric*
½ [½] yard Accent Fabric (includes Exterior pockets and Strap/Strap Holders)
¾ [½] yard Lining Fabric (includes Interior Pocket)
2 ¼ [1 7/8] yards Fusible Woven Interfacing (Pellon SF101 - 20”-wide)^
(1) 12” [10”] zipper* for top closure
(2) 1”-wide d-rings, (2) 1”-wide swivel clasps AND (1) 1”-wide strap slider (hardware kit available here)
(1) 18mm thin magnetic snap (for front pocket closure) OR (1) size 24 metal snap can be substituted
*PLEASE NOTE: this pattern is written for fixed-length zippers (not zipper by the yard, if using zipper by the yard please add 1.5" to the length of each designated zipper)
Recommended Fabrics: Canvas (6-8 oz. weight) for exterior and Accent fabric. Quilting cotton or lightweight canvas for Lining.
^= depending on your exterior or accent fabric choice (such as a heavier canvas or a waxed canvas in a 7-9 oz. weight), you may be able to omit the interfacing for the exterior fabric and/or some of the accent pieces. For this option, reduce fusible interfacing requirement to 1 ¼ [¾] yards and do not interface those pieces.
Additional supplies + tools: Polyester thread, water-soluble pen/tailor’s chalk, cutting mat, ruler, rotary cutter, size 14 or 16 denim or Microtex needle, glue or glue pen, (optional) 1”-wide x 50” leather strap/webbing (or length as desired) may be substituted for fabric strap
Featured Fabrics are Surface by Amy van Luijk for Figo Fabrics.
Perfect for on the go when you want something a little simpler but still keep organized. This classic crossbody with a zip top closure will be one you will want to make over and over again. Feature your favorite print or keep it simple with a solid! Includes front and back exterior pockets and interior pockets. Adjustable strap makes it wearable in any season. Perfect for gifting! Regular size and mini!
Special features:
top zipper to keep your belongings secure
front and back exterior pockets
two sizes to sew, regular and mini!
made entirely of rectangles, no need to cut out templates (see below for details)
Skill Level/Dimensions/Materials:
Skill Level: Advanced Beginner
+ Approx. Finished Dimensions: 9 ½” wide by 3” deep (measured at base), 9 ¼” tall, width at top opening is 12 ½” [8 ¼” wide by 2 ½” deep (measured at base), 8 ¼” tall, width at top opening is 10 ½”]
Materials needed:
Requirements based on 44”-wide fabric.
Exterior fabric requirement* not suitable for one-way directional fabric.
Mini size noted in [brackets].
FQ=Fat Quarter (18” x 22”)
½ yard [FQ] Exterior Fabric*
½ [½] yard Accent Fabric (includes Exterior pockets and Strap/Strap Holders)
¾ [½] yard Lining Fabric (includes Interior Pocket)
2 ¼ [1 7/8] yards Fusible Woven Interfacing (Pellon SF101 - 20”-wide)^
(1) 12” [10”] zipper* for top closure
(2) 1”-wide d-rings, (2) 1”-wide swivel clasps AND (1) 1”-wide strap slider (hardware kit available here)
(1) 18mm thin magnetic snap (for front pocket closure) OR (1) size 24 metal snap can be substituted
*PLEASE NOTE: this pattern is written for fixed-length zippers (not zipper by the yard, if using zipper by the yard please add 1.5" to the length of each designated zipper)
Recommended Fabrics: Canvas (6-8 oz. weight) for exterior and Accent fabric. Quilting cotton or lightweight canvas for Lining.
^= depending on your exterior or accent fabric choice (such as a heavier canvas or a waxed canvas in a 7-9 oz. weight), you may be able to omit the interfacing for the exterior fabric and/or some of the accent pieces. For this option, reduce fusible interfacing requirement to 1 ¼ [¾] yards and do not interface those pieces.
Additional supplies + tools: Polyester thread, water-soluble pen/tailor’s chalk, cutting mat, ruler, rotary cutter, size 14 or 16 denim or Microtex needle, glue or glue pen, (optional) 1”-wide x 50” leather strap/webbing (or length as desired) may be substituted for fabric strap
Featured Fabrics are Surface by Amy van Luijk for Figo Fabrics.
